Translate
Violation Detail
Standard Cited: 19100132 C General requirements.
This violation item has been deleted.
Inspection Nr: 1133357.015
Citation: 01002
Citation Type: Serious
Abatement Status:
Initial Penalty: $12,471.00
Current Penalty: $0.00
Issuance Date: 09/07/2016
Nr Instances: 4
Nr Exposed: 40
Abatement Date: 10/12/2016
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 09/28/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/28/2016 | $0.00 | 10/12/2016 | Serious | |
| Penalty | Z: Issued | 09/07/2016 | $12,471.00 | 10/12/2016 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.132(c): Personal protective equipment was not of safe design and construction for the work to be performed: On March 8, 2016, the employer failed to ensure employees performing work on the P3 Rolling Mill were protected against falls of up to 15 feet into the sluiceway by designing and constructing engineered/certified anchorage points. Employees perform maintenance in the following areas: a. Removing cobles in the south corner on the entry side of the P3 Rolling Mill. b. Performing preventative maintenance on the Grip Tilter while standing on the flat deck. c. Performing preventative and break down maintenance on the roller fingers, manipulator liners and inspect the spray nozzles while standing on the roller assembly or manipulator frame. d. Performing preventative maintenance and break down maintenance while standing on the South manipulator.