Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1124788.015
Citation: 01002
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,900.00
Current Penalty: $2,900.00
Issuance Date: 03/04/2016
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 05/02/2016
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 03/23/2016
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $2,900.00 | 05/02/2016 | Serious | ||
| Penalty | I: Informal Settlement | 03/23/2016 | $2,900.00 | 05/02/2016 | Serious | |
| Penalty | Z: Issued | 03/04/2016 | $4,900.00 | 03/30/2016 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a) Employees who performed servicing and maintenance on or around the Warner Swasey Lathe M-1200, were not required to : (1) Physically locate and operate the electrical disconnect in such a manner as to isolate the machine or equipment from the energy source in that on or about February 9, 2016 while making an adjustment to the lathe the machine was not turned off the prevent from actuation exposing employee to pinch point hazards. (2) Affix a lockout or tagout to the electrical disconnect.