Translate
Violation Detail
Standard Cited: 19260307 D01 Mechanical power-transmission apparatus.
Inspection Nr: 1095212.015
Citation: 01002
Citation Type: Serious
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $1,320.00
Current Penalty: $1,320.00
Issuance Date: 10/23/2015
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 11/04/2015
Gravity: 1
Report ID: 0830600
Contest Date:
Final Order: 02/16/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 10/23/2015 | $1,320.00 | 11/04/2015 | Serious |
Text For Citation: 01 Item/Group: 002 Hazard:
29 CFR 1926.307(d)(1): Pulley(s) with part(s) seven feet (2.128 m) or less from the floor or work platform were not guarded in accordance with the requirements specified in paragraphs (m) and (o) of this section:Note: Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than 6 ft. 6 in. (1.976 m) from the floor or platform may be guarded with a disk covering the spokes: (a) On or about September 28, 2015, the employer did not protect employees from caught-in hazards due to the air compressor not being guarded. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").