Translate
Violation Detail
Standard Cited: 19100334 A02 II Use of equipment.
Inspection Nr: 1524699.015
Citation: 01001C
Citation Type: Serious
Abatement Status: Not Completed - Worksite Changed
Initial Penalty: $2,575.00
Current Penalty: $0.00
Issuance Date: 09/28/2021
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 07/30/2024
Gravity: 5
Report ID: 0316700
Contest Date: 01/27/2022
Final Order: 07/30/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/30/2023 | $0.00 | 07/30/2024 | Serious | |
| Penalty | C: Contested | 02/04/2022 | $2,575.00 | 10/25/2021 | Serious | |
| Penalty | Z: Issued | 09/28/2021 | $2,575.00 | 10/25/2021 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.334(a)(2)(ii): When there was a defect or evidence of damage that could have exposed an employee to injury, the defective or damaged item was not removed from service until the repairs and tests necessary to render the electrical equipment safe had been made: (a) Lower Building, South Wall - The power cord for the DeWalt 10-inch compound miter saw had gotten cut, and the employer did not remove the saw from service and have the cord replaced by an authorized service center, as specified in the manufacturer's instruction manual. Instead, the employer spliced the cord with electrical tape, exposing employees to an electrical hazard, on or about the week of April 5, 2021. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and state employees and their representatives were informed of this abatement.