Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1504356.015
Citation: 01001C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 04/16/2021
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 06/07/2021
Gravity: 5
Report ID: 0521100
Contest Date:
Final Order: 05/04/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/04/2021 | $0.00 | 06/07/2021 | Serious | |
| Penalty | Z: Issued | 04/16/2021 | $0.00 | 06/07/2021 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: On or about November 30, 2020, employees were exposed to machine hazards associated with moving parts and entanglement hazards when they engaged in servicing and maintenance activities on the #1 Yoder Mill machine (M-20). The employer did not ensure that energy control application steps to control the electrical energy sources were implemented prior to allowing employees to removing scrap scarfing on the #1 Yoder mill machine. The machine was not shut down or turned off prior to engaging in this servicing and maintenance activity. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lockout/tagout device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)(i)], and verification of isolation [1910.147(d)(6)] were not implemented to protect employees from machine servicing hazards."