Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1392166.015
Citation: 01001C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $11,934.00
Current Penalty: $0.00
Issuance Date: 07/25/2019
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 09/11/2019
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 08/14/2019
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 08/14/2019 | $0.00 | 09/11/2019 | Serious | |
| Penalty | Z: Issued | 07/25/2019 | $11,934.00 | 09/11/2019 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence. a) On April 5, 2019, employees who performed servicing and maintenance on and around the Mazak CNC machine No. 65 were not required to: (1) know the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy, (2) Turn off and shut down the machines, (3) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (4) affix lockout or tagout devices to each energy isolating device, (5) prior to starting work on machines that have been locked out or tagged out, verify that isolation and deenergization of the machine or equipment have been accomplished. Employees required to rely upon a Euchner safety switch were exposed to a struck-by hazard from unexpected start-up of the Mazak VCN 700D CNC Machine No. 65.