Translate
Violation Detail
Standard Cited: 19100147 C04 II D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1301861.015
Citation: 01001C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 07/12/2018
Nr Instances: 8
Nr Exposed: 3
Abatement Date: 07/24/2018
Gravity: 10
Report ID: 0112600
Contest Date: 08/06/2018
Final Order: 11/04/2019
Related Event Code (REC): A;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 11/04/2019 | $0.00 | 07/24/2018 | Serious | |
| Penalty | C: Contested | 08/13/2018 | $0.00 | 07/24/2018 | Serious | |
| Penalty | Z: Issued | 07/12/2018 | $0.00 | 07/24/2018 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control. Site: In the production area, at the facility at 27 Nashua Street, Leominster, MA 01453, on 6/5/2018 Energy Control Procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control for the following: (a) Hazardous Energy Control Procedure Form HS-019 for the Bobst SA; (b) Hazardous Energy Control Procedure Form SH-060 for the XL-105; (c) Hazardous Energy Control Procedure Form M1000 for the M1000 Press Rear Splicer (a.k.a. Butler); (d) Hazardous Energy Control Procedure Form FC-087 for the 414 Flat Cutter; (e) Hazardous Energy Control Procedure Form SH-060 for the CD Press; (f) Hazardous Energy Control Procedure Form FM-174 for the MBO Folder; (g) Hazardous Energy Control Procedure Form "Trimmer" for the Corona Binder Trimmer; (h) Hazardous Energy Control Procedure Form "Steinemann" for the Steinemann Laminator.