Translate
Violation Detail
Standard Cited: 19260416 A03 General requirements.
This violation item has been deleted.
Inspection Nr: 1206296.015
Citation: 01001C
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/15/2017
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 04/10/2017
Gravity: 5
Report ID: 1032500
Contest Date:
Final Order: 04/14/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/14/2017 | $0.00 | 04/10/2017 | Serious | |
| Penalty | Z: Issued | 03/15/2017 | $0.00 | 04/10/2017 | Serious |
Text For Citation: 01 Item/Group: 001C Hazard:
29 CFR 1926.416(a)(3): Before work had begun the employer did not ascertain by inquiry or direct observation, or by instruments, whether any part of an energized electric power circuit, exposed or concealed, was so located that the performance of the work could bring any person, tool, or machine into physical or electrical contact with the electric power circuit: a) Production floor, Centennial Plastics: On January 30, 2017 and at times prior thereto an employee performed work above a 480 volt energized switch gear assembly. The employee removed a six inch bolted cover panel from the metal enclosed switch gear. Effective safe work practices, including but not limited to, a hazard assessment, was not used to determine if direct or indirect physical contact could be made with the energized buss and the tools being used or by another foreign object. Note) Certification of corrective action IS required for this item.