Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 717140.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/14/2013
Nr Instances: 6
Nr Exposed: 7
Abatement Date: 04/03/2013
Gravity: 5
Report ID: 0729300
Contest Date:
Final Order: 04/04/2013
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/04/2013 | $0.00 | 04/03/2013 | Serious | |
| Penalty | Z: Issued | 02/14/2013 | $0.00 | 04/03/2013 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) in that employee(s) were exposed to the hazard of being caught by: Inside of the Vehicle Maintenance Department, the following machines were not equipped with emergency stops: a/ Superior Power Tools Heavy Duty Drill Press, m/n 33-R27, s/n 55182. Inside of the Machine Shop, the following machines were not equipped with emergency stops: a/ Lucas Horizontal Boring Mill, m/n 43, s/n 43-3-1. b/ Supermill, m/n AV55, s/n 5040-6. c/ American Radial Arm Drilling Machine, unknown m/n, s/n 65101. d/ ENCO Milling Machine, unknown m/n or s/n. e/ Bridgeport Milling Machine, s/n 44156. One method of abatement to correct this apparent hazard is to install emergency stops as required by ANSI B11.8, paragraph 6.12.3. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method.