Translate
Violation Detail
Standard Cited: 19100305 A02 X Wiring methods, components, and equipment for general use.
Inspection Nr: 1823375.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/23/2025
Nr Instances: 3
Nr Exposed: 7
Abatement Date: 08/08/2025
Gravity: 1
Report ID: 0936300
Contest Date:
Final Order: 07/21/2025
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/21/2025 | $0.00 | 08/08/2025 | Serious | |
| Penalty | Z: Issued | 06/23/2025 | $0.00 | 08/08/2025 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.305(a)(2)(x): Flexible cords and cables were not protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. a. Machine Shop: The conduit was pulled away from one of the electrical boxes for the Yamazaki Lathe, exposing insulated conductors. Employee were exposed to electrical hazards. b. Structural Shop: Flexible cord which connected the wall mounted panel boxes to power was run through a cut out in the corrugated metal wall. Employees were exposed to electrical hazards. c. Paint Booth: Flexible cord, not protected from damage, which powered the spider box used as the temporary power source for the paint booth, was run for great lengths, over a pile of accumulated shop trash, connected to an electrical panel in another building. Employees were exposed to electrical hazards.