Translate
Violation Detail
Standard Cited: 19100147 C05 II The control of hazardous energy (lockout/tagout).
Inspection Nr: 1772047.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/10/2024
Nr Instances: 1
Nr Exposed: 34
Abatement Date: 10/04/2024
Gravity: 5
Report ID: 0729700
Contest Date:
Final Order: 10/03/2024
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/03/2024 | $0.00 | 10/04/2024 | Serious | |
| Penalty | Z: Issued | 09/10/2024 | $0.00 | 10/04/2024 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(c)(5)(ii): Lockout devices and tagout devices were not singularly identified; were not the only devices used for controlling energy; were used for other purposes; and did not meet the requirements of subparagraphs (A) through (D): Employees engaged in machinery activities in the fabrication department shop were exposed to electrical shock, amputation, struck-by, caught-in and caught-between hazards in that devices other than lockout devices and tagout devices were used for controlling energy of the malfunctioning Peck, Stow & Wilcox roller machine, Model # 390-E, Serial # 3/61. It was improperly tagged out of service. The tagout device was not standardized, substantial, identifiable, but a Quality Assurance Card or a Part Rejected Card was inappropriately used as a makeshift tagout device, this is not a typical normal tagout device.