Text For Citation: 01 Item/Group: 001B Hazard:

29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: Each employee was not required to: (1) turn off and shut down the machines, (2) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the electric and pneumatic energy sources, (3) affix lockout or tagout devices to each energy-isolating device, (4) verify the effectiveness of energy isolation. a) On or about June 13, 2024, on the Colborne dough divider, the machine operator performing servicing operations, did not lock out the electrical when performing tasks such as cleaning the belts, brick portioner and flour wheel. Phillips Homemade LLC DBA Mehaffies Pies was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1602693, citation number 1, item number 1b and was affirmed as a final order on October 4, 2022, with respect to a workplace located at 3013 Linden Avenue, DAYTON, OH 45410.