Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1745778.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $16,131.00
Current Penalty: $0.00
Issuance Date: 08/13/2024
Nr Instances: 1
Nr Exposed: 2
Abatement Date: 09/03/2024
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 09/13/2024
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/13/2024 | $0.00 | 09/03/2024 | Serious | |
| Penalty | Z: Issued | 08/13/2024 | $16,131.00 | 09/03/2024 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d):Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence as required by 29 CFR 1910.147(d)(1) through (d)(6): a. Located in the Heading Department: On or about April 25, 2024, employees were exposed to machine hazards associated with moving planner and cutter heads during servicing and un-unjamming material from the machine. The employer did not ensure that energy control application steps were implemented as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from the machine servicing hazards.