Text For Citation: 01 Item/Group: 001B Hazard:

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Molding Department- On or about April 24, 2024, the employer did not ensure that all guards on machines, such as air press machine "A", were affixed and/or secured in a manner that would prevent employees from having any part of their body in between moving machine parts during the operation cycle. b) Molding Department- On or about April 19, 2024, the employer did not ensure that all guards on machines, such as air press machine A25-multi, were affixed and/or secured in a manner that would prevent employees from having any part of their body in between moving machine parts during the operation cycle. c) Molding Department- On or about April 19, 2024, the employer did not ensure that all guards on machines, such as air press machine H-multi, were affixed and/or secured in a manner that would prevent employees from having any part of their body in between moving machine parts during the operation cycle. d) Molding Department- On or about April 19, 2024, the employer did not ensure that all guards on machines, such as air press machine A47, were affixed and/or secured in a manner that would prevent employees from having any part of their body in between moving machine parts during the operation cycle. e) Molding Department- On or about April 19, 2024, the employer did not ensure that all guards on machines, such as air press machine A38, were affixed and/or secured in a manner that would prevent employees from having any part of their body in between moving machine parts during the operation cycle.