Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1673876.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Not Completed - AD Discretion
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 09/01/2023
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 11/15/2023
Gravity: 10
Report ID: 0521400
Contest Date:
Final Order: 09/28/2023
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/28/2023 | $0.00 | 11/15/2023 | Serious | |
| Penalty | Z: Issued | 09/01/2023 | $0.00 | 10/02/2023 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedures for the application of energy control (the lockout or tagout procedures) control (the lockout or tagout procedure) was not done in sequence as required by 29 CFR 1910.147(d)(1) through (d)(6): On or about May 31, 2023, the employer did not ensure ensure that employees implemented energy control application steps prior to allowing them to perform set-up tasks on the "Haeger" press, such as tooling changes. The "Haeger" was not shut down or turned off prior to employees engaging in this servicing and maintenance activity, exposing them to pinch/nip point hazards and amputation injuries. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lockout/tagout device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)(i)], and verification of isolation [1910.147(d)(6)] were not implemented to protect employees from machine hazards. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).