Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1668935.015
Citation: 01001B
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 08/01/2023
Nr Instances: 1
Nr Exposed: 50
Abatement Date: 08/21/2023
Gravity: 10
Report ID: 0522500
Contest Date: 08/14/2023
Final Order: 05/06/2024
Related Event Code (REC): A;R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 05/06/2024 | $0.00 | 08/21/2023 | Serious | |
| Penalty | C: Contested | 08/15/2023 | $0.00 | 08/21/2023 | Serious | |
| Penalty | Z: Issued | 08/01/2023 | $0.00 | 08/21/2023 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
CFR 1910.147(d):Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence as required by 29 CFR 1910.147(d)(1) through (d)(6): a. On or about April 30, 2023, and at times prior, employees were exposed to machine hazards associated with moving parts, in-going nip points and pinch points during servicing of the R81 Perini paper converting machine including, but not limited to, clearing paper wrap-ups, servicing the ink pump and changing the doctor blades in the print unit section of the machine. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine hazards.