Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1606892.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $10,151.00
Current Penalty: $0.00
Issuance Date: 10/06/2022
Nr Instances: 3
Nr Exposed: 3
Abatement Date: 07/20/2023
Gravity: 10
Report ID: 0522000
Contest Date: 10/24/2022
Final Order: 08/28/2023
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/28/2023 | $0.00 | 07/20/2023 | Serious | |
| Penalty | C: Contested | 10/24/2022 | $10,151.00 | 11/25/2022 | Serious | |
| Penalty | Z: Issued | 10/06/2022 | $10,151.00 | 11/25/2022 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (2) Machine or equipment shutdown. (3) Machine or equipment isolation. (4) Lockout or Tagout. (5) Stored energy. (6) Verification of isolation. (7) Release from lockout or tagout. a) On or about July 11, 2022, employees were exposed to machine hazards associated with the 400-ton Blow press during the setup activity of die changes. The employer failed to implement the energy control application steps as the 400-ton Blow press was not shut down or turned off to perform the setup activity (per 1910.147(d)(2-7) requirements). b) On or about July 11, 2022, employees were exposed to machine hazards associated with the 500-ton Komatsu press during the setup activity of die changes. The employer failed to implement the energy control application steps as the 500-ton Komatsu press was not shut down or turned off to perform the setup activity (per 1910.147(d)(2-7) requirements). c) On or about July 11, 2022, employees were exposed to machine hazards associated with the 300-ton Niagara press during the setup activity of die changes. The employer failed to implement the energy control application steps as the 300-ton Niagara press was not shut down or turned off to perform the setup activity (per 1910.147(d)(2-7) requirements).