Translate
Violation Detail
Standard Cited: 19100028 B03 II Duty to have fall protection and falling object protection.
Inspection Nr: 1604943.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $6,153.00
Current Penalty: $0.00
Issuance Date: 12/05/2022
Nr Instances: 4
Nr Exposed: 10
Abatement Date: 01/09/2023
Gravity: 1
Report ID: 0626700
Contest Date:
Final Order: 12/22/2022
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/22/2022 | $0.00 | 01/09/2023 | Serious | |
| Penalty | Z: Issued | 12/05/2022 | $6,153.00 | 01/09/2023 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.28(b)(3)(ii): The employer did not ensure each employee was protected from tripping into or stepping into or through any hole that was less than 4 feet (1.2 m) above a lower level by covers or guardrail systems: a) In the plant, employees were exposed to tripping hazards while operating the Okuma CNC machine Serial Number 227776 which had an unguarded floor opening approximately 240-inches long and 10-inches deep. b) In the plant, employees were exposed to tripping hazards while operating the Okuma CNC machine Serial Number 227776 which had four unguarded 10-inch by 10-inch, 10-inch deep floor openings. c) In the plant, employees were exposed to tripping hazards while operating the Okuma CNC Line 2 machine Serial Number 227777 which had four unguarded 10-inch by 10-inch, 25-inch deep floor openings. d) In the plant, employees were exposed to tripping hazards while operating the Straightening Machine which had an unguarded floor opening 41-inches deep.