Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1567281.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 05/02/2022 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 02/18/2022
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 03/24/2022
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/24/2022 | $0.00 | 05/02/2022 | Serious | |
| Penalty | Z: Issued | 02/18/2022 | $0.00 | 03/11/2022 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): On or about November 27, 2021, the employer did not ensure an established procedure was followed for the application of energy controls (lockout/tagout) and were done in sequence during service and maintenance on a Sonny car wash conveyor chain and roller assemblies. Employees did not apply energy controls by; turning off and/or shutting down the hydraulic motor, isolating the air and shutting down the electric drive motor and gear box [per the 1910.147(d)(2) requirements], isolating all energy sources [(d)(3)], affixing a lockout device to the energy isolating device [(d)(4)], and verify the equipment energy was isolated and de-energized prior to starting work [(d)(6)].