Translate
Violation Detail
Standard Cited: 19100217 C03 IV D Mechanical power presses.
Inspection Nr: 1561184.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/20/2022
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 03/09/2022
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 02/15/2022
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | Z: Issued | 01/20/2022 | $0.00 | 03/09/2022 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.217(c)(3)(iv)(d):Each pull-out device in use shall be visually inspected and checked for proper adjustment at the start of each operator shift, following a new die set-up, and when operators are changed. Necessary maintenance or repair or both shall be performed and completed before the press is operated. Records of inspections and maintenance shall be kept in accordance with paragraph (e) of this section. a) On 10/22/2021 the employer did not visually inspect the pull-back system to ensure proper adjustment prior to an employee working on the Minster 32 ton part revolution punch press (model # 4-13600), as a result of the pull-back system not being adjusted properly, this allowed the employee's hand to be in the point of operation during the stroke.