Text For Citation: 01 Item/Group: 001B Hazard:

29 CFR 1910.332(c):Type of training. The training required by this section shall be of the classroom or on-the-job type. The degree of training provided shall be determined by the risk to the employee. TABLE S-4. -- Typical Occupational Categories of Employees Facing a Higher Than Normal Risk of Electrical Accident _________________________________________________________________________ Occupation _________________________________________________________________________ Blue collar supervisors(1) Electrical and electronic engineers(1) Electrical and electronic equipment assemblers(1) Electrical and electronic technicians(1) Electricians Industrial machine operators(1) Material handling equipment operators(1) Mechanics and repairers(1) Painters(1) Riggers and roustabouts(1) Stationary engineers(1) Welders _________________________________________________________________________ Footnote(1) Workers in these groups do not need to be trained if their work or the work of those they supervise does not bring them or the employees they supervise close enough to exposed parts of electric circuits operating at 50 volts or more to ground for a hazard to exist. On or about 9/26/20 People Ready did not train the unqualified employees who worked on installing solar panels according to the position that employees would be filling in that the unqualified employees were not trained on the following: (i) The skills and techniques necessary to distinguish exposed live parts from other parts of electric equipment. (ii) The skills and techniques necessary to determine the nominal voltage of exposed live parts, and (iii) The clearance distances specified in 1910.333(c) and the corresponding voltages to which the qualified person will be exposed.