Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
This violation item has been deleted.
Inspection Nr: 1470579.015
Citation: 01001B
Citation Type: Serious
Abatement Status:
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 05/29/2020
Nr Instances: 1
Nr Exposed: 6
Abatement Date: 06/11/2020
Gravity: 10
Report ID: 0524700
Contest Date:
Final Order: 06/25/2020
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/25/2020 | $0.00 | 06/11/2020 | Serious | |
| Penalty | Z: Issued | 05/29/2020 | $0.00 | 06/11/2020 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Crown Battery Manufacturing Co. located at 1445 Majestic Drive in Fremont, Ohio; On or about March 16, 2020 the employer did not ensure that employees utilized energy control procedures prior to clearing a jammed plate in the folder of COS Line 2. Employees were exposed to amputation and caught in hazards in that the energy sources were not isolated prior to engaging in this activity. As a result, the remaining applicable energy control elements, involving machine isolation [1910.147(d)(3)], lock-out/tag-out device application [1910.147(d)(4)], dissipation of residual energy [1910.147(d)(5)], and verification of isolation [1910.147(d)(6)], are not implemented to protect employees from machine servicing hazards such as but not limited to, clearing jammed plates.