Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1461419.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $13,494.00
Current Penalty: $0.00
Issuance Date: 04/14/2020
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 05/08/2020
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 05/05/2020
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 05/05/2020 | $0.00 | 05/08/2020 | Serious | |
| Penalty | Z: Issued | 04/14/2020 | $13,494.00 | 05/08/2020 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: (1) authorized employee shall have knowledge of the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy. (2) turn off and shut down the machine (3) physically locate and operate the energy isolating devices in such a manner as to isolate the machine or equipment from the energy sources. (4) affix lockout or tagout devices to each energy isolating device (5) Prior to starting work on machines that have been locked out or tagged out, verify that isolation and deenergizing of the machine or equipment have been accomplished. a) On 2/7/2020 CSHO observed an employee inside of a Lemo Bag Machine #42(model # 3800-41T)removing damaged film from the hot cutting knife. The employee was not required to lock out the machine prior to beginning the jam clearing process. Employees are exposed to caught-in and burn hazards.