Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1398579.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 06/21/2019
Nr Instances: 1
Nr Exposed: 40
Abatement Date: 07/26/2019
Gravity: 10
Report ID: 0522500
Contest Date:
Final Order: 07/09/2019
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/09/2019 | $0.00 | 07/26/2019 | Serious | |
| Penalty | Z: Issued | 06/21/2019 | $0.00 | 07/26/2019 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: a. On or before April 27, 2019, employees were exposed to machine hazards associated with moving parts during the clearing of jams and/or other servicing activities in the Dexter feeder (model: 6MPP; S/N: 24034) on the MD4 press located in the press line/department. The employer failed to implement energy control application steps as the machine was not shut down or turned off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from machine servicing hazards.