Translate
Violation Detail
Standard Cited: 19100213 C03 Woodworking machinery requirements.
Inspection Nr: 1295938.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 03/15/2018
Nr Instances: 1
Nr Exposed: 7
Abatement Date: 04/10/2018
Gravity: 5
Report ID: 0830400
Contest Date:
Final Order: 04/04/2018
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 04/04/2018 | $0.00 | 04/10/2018 | Serious | |
| Penalty | Z: Issued | 03/15/2018 | $0.00 | 04/10/2018 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.213(c)(3): The employer did not ensure that each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a)Component Manufacturing Company at 4301 North 2nd Avenue, Sioux Falls, SD 57104: On and prior to February 16, 2018 the employer did not ensure employees were protected from struck-by hazards in that the Delta Rockwell 12"-14" Tilting Arbor Saw (Model: 34-350 and SN:14559010) was not equipped with nonkickback fingers or dogs to prevent kickback when employees performed rip cuts. This condition exposed employees to struck-by hazards.