Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1167627.015
Citation: 01001B
Citation Type: Serious
Abatement Date: 07/23/2018 2
Initial Penalty: $0.00
Current Penalty: $0.00
Issuance Date: 01/18/2017
Nr Instances: 2
Nr Exposed: 10
Related Event Code (REC):
Gravity: 10
Report ID: 0418100
Contest Date: 02/13/2017
Final Order: 01/29/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | P: Petition to Mod Abatement | $0.00 | 07/23/2018 | Serious | ||
| Penalty | C: Contested | 02/20/2018 | $0.00 | 02/13/2017 | Serious | |
| Penalty | F: Formal Settlement | 01/29/2018 | $0.00 | 02/20/2018 | Serious | |
| Penalty | Z: Issued | 01/18/2017 | $0.00 | 02/13/2017 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about September 15, 2016, at Aspen Products, Inc., 3220 Avondale Mill Road, Macon, Georgia, production floor: a) Employees performed servicing of Peerless Model E-57 Presses to include, but not limited to clearing jams without utilizing Lockout/tag out procedures were exposed to amputation hazards and one employee was injured amputating his right middle finger while clearing a jam from the Peerless Model E-57, Serial Number E5-1004-15, when lockout/tag out procedures were not utilized. b) An employee performed servicing of a Peerless Model E-57, Serial Number E5-1012-15 without utilizing Lockout/tag out procedures was exposed to amputation hazards when he stood inside the press to clear a jam and thread the paper into the press.