Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1130826.015
Citation: 01001B
Citation Type: Other
Abatement Status: Abatement Completed
Initial Penalty: $12,471.00
Current Penalty: $6,000.00
Issuance Date: 08/29/2016
Nr Instances: 8
Nr Exposed: 4
Abatement Date: 09/23/2016
Gravity:
Report ID: 0522000
Contest Date:
Final Order: 09/21/2016
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/21/2016 | $6,000.00 | 09/23/2016 | Other | |
| Penalty | Z: Issued | 08/29/2016 | $12,471.00 | 09/23/2016 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: Employees who performed servicing and maintenance on and around the CNC machines were not required to : (1) turn off and shut down the machines, (2) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source, (3) affix lockout or tagout devices to each energy isolating device. (b) Employees cleaned the inside of the CNC machines without first isolating the electric and pneumatic energy sources and then attaching lockout devices to the electrical and pneumatic energy isolating devices.