Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1108587.015
Citation: 01001B
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $4,900.00
Current Penalty: $0.00
Issuance Date: 02/10/2016
Nr Instances: 1
Nr Exposed: 18
Abatement Date: 04/04/2016
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 03/04/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 03/04/2016 | $0.00 | 04/04/2016 | Serious | |
| Penalty | Z: Issued | 02/10/2016 | $4,900.00 | 03/01/2016 | Serious |
Text For Citation: 01 Item/Group: 001B Hazard:
29 CFR 1910.147(d): Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence: Employees who performed weld die changes, servicing and maintenance on the Microweld machine AD-5 were not required to: (1) know the type and magnitude of the energy, the hazards of the energy to be controlled, and the method or means to control the energy. (2) turn off and shut down the machine (3) physically locate and operate energy isolating devices in such a manner as to isolate the machine or equipment from the energy source. (4) affix lockout devices on each energy isolating device. (5) prior to starting work on machines that have been locked out, verify that isolation and deenergization of the machine or equipment have been accomplished.