Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 315082628
Citation: 01001A
Citation Type: Serious
Abatement Status: I
Initial Penalty: $4,400.00
Current Penalty: $4,400.00
Issuance Date: 05/10/2011
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 05/13/2011
Gravity: 05
Report ID: 0729700
Contest Date: 06/01/2011
Final Order: 07/23/2012
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/23/2012 | $4,400.00 | 05/13/2011 | Serious | |
| Penalty | Z: Issued | 05/10/2011 | $4,400.00 | 05/13/2011 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard: STRUCK BY
Section 5(a)1 of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to hazards: AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE METHOD TO CORRECT THIS HAZARD IS: Employees were exposed to fire and struck-by hazards in that pressurized cylinders such as Carbon Dioxide (CO2) located on the South side of the Oil building, were not secured to keep them from being knocked over/damaged. Among other methods, one feasible and acceptable method is: Store cylinders in accordance with all local, state and municipal regulations and in accordance with appropriate standard the compressed Gas Association and the National Fire Protection Association, From the Fifth Addition 1965,Pamphlet P-1, Compressed Gas Association, Inc. New York, New York. Page 5. Storing cylinders 3.3 Paragraph 3.3.1 and 3.3.8, Protect cylinders from any object that will produce a cut or other abrasion in the surface of the metal. Store in locations where heavy moving objects may not strike or fall on them. 29 CFR 1903.19(c)(2) abatement of the above violation was verified at the time of inspection. No certification is required.tion
Translate