Translate
Violation Detail
Standard Cited: 19100215 A01 Abrasive wheel machinery.
Inspection Nr: 1679203.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $9,297.00
Current Penalty: $5,950.00
Issuance Date: 09/07/2023
Nr Instances: 6
Nr Exposed: 6
Abatement Date:
Gravity: 10
Report ID: 0522000
Contest Date:
Final Order: 09/20/2023
Related Event Code (REC): A
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/20/2023 | $5,950.00 | Serious | ||
| Penalty | Z: Issued | 09/07/2023 | $9,297.00 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.215(a): General requirements. 29 CFR 1910.215(a)(1):Machine guarding. Abrasive wheels shall be used only on machines provided with safety guards as defined in the following paragraphs of this section a) On or about June 23, 2023, employee1 was performing grinding duties on the outside of a cast carbon steel bearing journal in work station 3 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (unnumbered) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards when the grinding wheel exploded, resulting in employee1's death. b) On or about June 23, 2023, employee2 was performing grinding duties on the outside of a cast carbon steel part in work station 2 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (grinder 4) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards. c) On or about June 23, 2023, employee2 was performing grinding duties on the outside of a cast carbon steel part in work station 2 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (grinder 5) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards. d) On or about June 23, 2023, employee3 was performing grinding duties on the outside of a cast carbon steel part in work station 4 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (grinder 8) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards. e) On or about June 23, 2023, employee3 was performing grinding duties on the outside of a cast carbon steel part in work station 4 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (grinder 9) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards. f) On or about June 23, 2023, employee3 was performing grinding duties on the outside of a cast carbon steel part in work station 4 while utilizing an unguarded Dobco Top Cat pneumatic hand grinder (grinder 11) with a 6 inch diameter silica composite grinding wheel, exposing them to struck-by flying object hazards.