Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1531031.015
Citation: 01001A
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $30,037.00
Current Penalty: $19,524.00
Issuance Date: 09/30/2021
Nr Instances: 1
Nr Exposed: 40
Abatement Date: 10/20/2021
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 10/21/2021
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 10/21/2021 | $19,524.00 | 10/20/2021 | Repeat | |
| Penalty | Z: Issued | 09/30/2021 | $30,037.00 | 10/20/2021 | Repeat |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i):Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section. On or about May 12, 2021, the employer failed to develop and implement a full site specific written program for the control of hazardous energy for equipment and machinery to include but not limited to the Sterling blow mold presses (14 total) that have energy sources to include but are not limited to mechanical, electrical, hydraulic and pneumatic. NOTE: The employer was previously cited for a violation of this occupational safety and health standard or it's equivalent standard which was contained in OSHA Inspection #1408053, citation 2, item 1, which was affirmed as final order on May 7, 2020, with respect to the same workplace location as detailed in this inspection.