Translate
Violation Detail
Standard Cited: 19100213 C01 Woodworking machinery requirements.
Inspection Nr: 1441550.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 01/31/2020 2
Initial Penalty: $3,978.00
Current Penalty: $2,784.00
Issuance Date: 12/10/2019
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0522300
Contest Date:
Final Order: 01/07/2020
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/07/2020 | $2,784.00 | 01/31/2020 | Serious | |
| Penalty | Z: Issued | 12/10/2019 | $3,978.00 | 01/07/2020 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.213(c)(1): Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be positive, reliable, and in true alignment with the saw; and the mounting shall be adequate in strength to resist any reasonable side thrust or other force tending to throw it out of line. On or about October 22, 2019, the employer did not ensure the blade of a Bosch, Model 4100 table saw was guarded with a hood that completely enclosed the portion of the blade above the table.