Text For Citation: 01 Item/Group: 001A Hazard:

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. On or about April 14, 2019, a periodic inspection of the energy control procedures was not performed to assure that the lockout/tagout procedure and requirements of 29 CFR 1910.147 were being followed. The employer did not assure that the energy control procedures for Line #9 equipment such as, but not limited to, the cyclone and extruder were inspected. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.