Translate
Violation Detail
Standard Cited: 19100147 C04 II B The control of hazardous energy (lockout/tagout).
Inspection Nr: 1362882.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $7,114.00
Current Penalty: $4,624.10
Issuance Date: 01/16/2019
Nr Instances: 2
Nr Exposed: 10
Abatement Date: 03/22/2019
Gravity: 5
Report ID: 0522500
Contest Date:
Final Order: 01/31/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/31/2019 | $4,624.10 | 03/22/2019 | Serious | |
| Penalty | Z: Issued | 01/16/2019 | $7,114.00 | 02/21/2019 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(ii): The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following: 29 CFR 1910.147(c)(4)(ii)(B): Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. a. On or before November 29, 2018, the employer's hazardous energy control procedures and energy source identification form for the Comco KB-70 bender (model: KB-70NS; S/N: K-02707-N) did not identify the hydraulic energy source and the specific method, device or system to de-energize the power sources to protect employees while servicing and/or performing maintenance activities. b. On or before December 18, 2018, the employer's hazardous energy control procedures and energy source identification form for the Chiyoda SP-90 bender (model: SP-90S; S/N: 8507) did not identify the hydraulic energy source and the specific method, device or system to de-energize the power sources to protect employees while servicing and/or performing maintenance activities.