Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1350361.015
Citation: 01001A
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $12,934.00
Current Penalty: $9,700.50
Issuance Date: 12/04/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date:
Gravity:
Report ID: 0729300
Contest Date:
Final Order: 12/17/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 12/17/2018 | $9,700.50 | Other | ||
| Penalty | Z: Issued | 12/04/2018 | $12,934.00 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, was not guarded. The guarding device was not in conformity with appropriate standards therefore, or, in the absence of applicable specific standards, was not so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle. On or about 09/24/2018, at Missouri Metals, located at 9970 Page Ave., St Louis, MO, 63132, an employee was exposed to point of operation hazards while operating the ELGA Hydra Shear, Serial #1014M66521, Model # Illegible. An employee sustained injuries to left ring/middle fingers.