Translate
Violation Detail
Standard Cited: 19260300 A General requirements.
Inspection Nr: 1341392.015
Citation: 01001A
Citation Type: Other
Abatement Status: Corrected During Inspection
Initial Penalty: $6,467.00
Current Penalty: $0.00
Issuance Date: 10/16/2018
Nr Instances: 1
Nr Exposed: 2
Abatement Date:
Gravity:
Report ID: 0522300
Contest Date:
Final Order: 11/01/2018
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 11/01/2018 | $0.00 | Other | ||
| Penalty | Z: Issued | 10/16/2018 | $6,467.00 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1926.300(a): Hand tool(s), power tool(s) or similar equipment were not maintained in a safe condition: On or about August 17, 2018, employees were installing wood blocking material between steel ribs and steel liner plates at Shaft #3 H-08 regulator shaft. Employees were using a hydraulic single acting cylinder ram (Model RC104) attached to a portable electrical Enerpac hydraulic pump unit (model PUJ1200B). Hydraulic oil was leaking from the base and pressure side of the cylinder ram because the bolt fastener was loose. The hydraulic unit on/off switch was broken and the identification label that included the capacity of the unit was missing.