Translate
Violation Detail
Standard Cited: 19100028 B01 I Duty to have fall protection and falling object protection.
Inspection Nr: 1330679.015
Citation: 01001A
Citation Type: Repeat
Abatement Status: Abatement Completed
Initial Penalty: $50,815.00
Current Penalty: $75,546.00
Issuance Date: 01/10/2019
Nr Instances: 1
Nr Exposed: 12
Abatement Date: 02/01/2019
Gravity: 5
Report ID: 0521100
Contest Date: 02/04/2019
Final Order: 07/25/2019
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 07/25/2019 | $75,546.00 | 02/01/2019 | Repeat | |
| Penalty | C: Contested | 02/05/2019 | $50,815.00 | 02/01/2019 | Repeat | |
| Penalty | Z: Issued | 01/10/2019 | $50,815.00 | 02/01/2019 | Repeat |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.28(b)(1)(i): (1) Unprotected sides and edges. (i) Except as provided elsewhere in this section, the employer must ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the following: The employer did not ensure a guardrail system was installed where employees walked on the catwalk while cleaning oscillators for the centrifugal cutters and/or observing equipment operation on the mezzanine. There was an approximately nine inch wide section without guardrails and the oscillator height was 29 inches high, exposing employees to an approximately 12' fall hazard. Del Monte Foods, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 1910.28(b)(1)(i) which was contained in OSHA inspection number 1247076, citation number 1, item number 1 and was affirmed as a final order on January 4, 2018, with respect to a workplace located at 1400 Plover Road, Plover, WI 54467.