Translate
Violation Detail
Standard Cited: 19100147 D The control of hazardous energy (lockout/tagout).
Inspection Nr: 1323726.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $12,934.00
Current Penalty: $12,934.00
Issuance Date: 09/07/2018
Nr Instances: 1
Nr Exposed: 4
Abatement Date: 10/03/2018
Gravity: 10
Report ID: 0521700
Contest Date: 10/05/2018
Final Order: 03/25/2019
Related Event Code (REC): R
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/25/2019 | $12,934.00 | 10/03/2018 | Serious | |
| Penalty | C: Contested | 11/28/2018 | $12,934.00 | 10/03/2018 | Serious | |
| Penalty | Z: Issued | 09/07/2018 | $12,934.00 | 10/03/2018 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Roll forming Department - On or about June 11, 2018, employees were exposed to machine hazards associated with moving parts when greasing rollers on Roll Former #101, which was attached to the Rousselle press. The employer failed to implement energy control application steps as the machine was not shut down or turn off to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect employees from servicing hazards.