Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1277811.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $0.00
Current Penalty: $4,000.00
Issuance Date: 03/30/2018
Nr Instances: 1
Nr Exposed: 3
Abatement Date: 05/16/2018
Gravity: 5
Report ID: 0523400
Contest Date: 04/17/2018
Final Order: 10/01/2018
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 10/01/2018 | $0.00 | 05/16/2018 | Serious | |
| Penalty | F: Formal Settlement | 10/01/2018 | $4,000.00 | 05/16/2018 | Serious | |
| Penalty | C: Contested | 04/18/2018 | $6,467.00 | 05/16/2018 | Serious | |
| Penalty | C: Contested | 04/18/2018 | $0.00 | 05/16/2018 | Serious | |
| Penalty | Z: Issued | 03/30/2018 | $6,467.00 | 05/16/2018 | Serious | |
| Penalty | Z: Issued | 03/30/2018 | $0.00 | 05/16/2018 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) The employer did not ensure that a program was established in the company that addressed the control of hazardous energy during servicing and maintenance functions on machines. 29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) The employer did not ensure that hazardous energy control procedures were developed, documented and utilized to control hazardous energy during when performing servicing and maintenance on machines such as but not limited to the Motion Master and DMS machine.