Text For Citation: 01 Item/Group: 001A Hazard:

29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that the procedures and the requirement of this standard were being followed: a) 255 N. Rehoboth Blvd, Milford, DE - On or about October 30, 2017: the employer failed to perform, at least annually, an inspection of the energy control procedures to ensure that the procedure and requirement of the standard were being followed. Abatement Note: 1. The periodic inspection shall be performed by an authorized employee other than the ones(s) utilizing the energy control procedure being inspected. 2. The periodic inspection shall be conducted to correct any deviations or inadequacies identified. 3. Where lockout is used for energy control, the periodic inspection shall include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected. 4. Where tagout is used for energy control, the periodic inspection shall include a review, between the inspector and each authorized and affected employee, of that employee's responsibilities under the energy control procedure being inspected, and the elements set forth in paragraph (c)(7)(ii) of this section. 5. The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.