Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
Inspection Nr: 1230140.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Corrected During Inspection
Initial Penalty: $6,338.00
Current Penalty: $12,675.00
Issuance Date: 10/02/2017
Nr Instances: 1
Nr Exposed: 93
Abatement Date: 06/15/2018
Gravity: 5
Report ID: 0728900
Contest Date: 10/27/2017
Final Order: 03/08/2018
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 03/08/2018 | $12,675.00 | 06/15/2018 | Serious | |
| Penalty | C: Contested | 10/30/2017 | $6,338.00 | Serious | ||
| Penalty | Z: Issued | 10/02/2017 | $6,338.00 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: The employer is failing to protect employees from struck-by hazards while using a company manufactured spreader beam. This most recently occurred on May 4, 2017 at 13433 Centech Road, Omaha, Nebraska, where employees were using an unmarked and unrated spreader beam to lift and hoist steel materials weighing up to 15,000 pounds. Among other methods, one feasible and acceptable means of abatement would be to replace the spreader beam lifting device with one that is marked and rated in accordance with ASME B30.20-2013, Below-the-Hook Lifting Device, Chapter 20-1, page 13.