Translate
Violation Detail
Standard Cited: 19100147 C04 I The control of hazardous energy (lockout/tagout).
Inspection Nr: 1227271.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $9,054.00
Current Penalty: $9,959.00
Issuance Date: 06/14/2017
Nr Instances: 1
Nr Exposed: 1
Abatement Date: 07/19/2017
Gravity: 5
Report ID: 0522300
Contest Date:
Final Order: 06/27/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 06/27/2017 | $9,959.00 | 07/19/2017 | Serious | |
| Penalty | Z: Issued | 06/14/2017 | $9,054.00 | 07/05/2017 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about April 24th, 2017, the employer failed to ensure that machine specific procedures were developed and followed where employees were changing out the blade of the Powermatic Houdaille table saw(Serial #797200511), located in the saw room. Employees are changing out the saw blade by turning off the machine but not turning off the main disconnect switch or locking out any components of the table saw or at the main disconnect. The last time a saw blade was changed out in the manner was sometime in February of 2017.