Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1224004.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $8,873.00
Current Penalty: $6,652.00
Issuance Date: 09/14/2017
Nr Instances: 1
Nr Exposed: 5
Abatement Date: 11/01/2017
Gravity: 10
Report ID: 0214700
Contest Date:
Final Order: 09/26/2017
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/26/2017 | $6,652.00 | 11/01/2017 | Serious | |
| Penalty | Z: Issued | 09/14/2017 | $8,873.00 | 11/01/2017 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. Worksite: Employees are required to provide repair and maintenance on equipment such as, but not limited to an Otto Martin Maschinebau T26 Router , Otto Martin Maschinebau T72 Table Saw , and a Sicma DT530 Plainer. The employer did not provide the employees with a Lockout/Tagout program; on or about 4/11/17. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.