Translate
Violation Detail
Standard Cited: 19100212 A01 General requirements for all machines.
Inspection Nr: 1212725.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 01/18/2018 2
Initial Penalty: $8,873.00
Current Penalty: $9,506.75
Issuance Date: 07/11/2017
Nr Instances: 5
Nr Exposed: 2
Related Event Code (REC):
Gravity: 10
Report ID: 0728500
Contest Date: 07/17/2017
Final Order: 08/09/2018
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | F: Formal Settlement | 08/09/2018 | $9,506.75 | 01/18/2018 | Serious | |
| Penalty | C: Contested | 07/19/2017 | $8,873.00 | 08/14/2017 | Serious | |
| Penalty | Z: Issued | 07/11/2017 | $8,873.00 | 08/14/2017 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Employees were exposed to amputation hazards on the Duct Line. Guarding was not provided for the Chicago Dreis & Krump Cross Brake. There was no point of operation guarding for the Chicago Dreis & Krump Cross Brake. b) Employees were exposed to amputation hazards on the Duct Line. Guarding was not provided for both Lock Formers. There was no point of operation guarding for both Lock Formers. (c) Employees were exposed to amputation hazards when operating the Bridgeport Milling Machines. There was no point of operation guarding for the rotating chuck and the unused portion of the drill bit. The Bridgeport Milling Machines are located in the Shear Shop. (d) Employees were exposed to amputation hazards from the 500 Machine manufactured by Vicon Machinery. The shear part of the 500 Machine was not guarded. The 500 Machine is located in B Side Fittings. (e) Employees were exposed to amputation hazards from the Old Collar Line Machine manufactured by Vicon Machinery. The shear part of the Old Collar Line was not guarded. The Old Collar Line Machine is located in B Side Fittings.