Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1132394.015
Citation: 01001A
Citation Type: Serious
Abatement Date: 08/04/2016 2
Initial Penalty: $4,900.00
Current Penalty: $2,500.00
Issuance Date: 06/17/2016
Nr Instances: 1
Nr Exposed: 5
Related Event Code (REC):
Gravity: 10
Report ID: 0523400
Contest Date:
Final Order: 07/06/2016
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 07/06/2016 | $2,500.00 | 08/04/2016 | Serious | |
| Penalty | Z: Issued | 06/17/2016 | $4,900.00 | 08/04/2016 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: (a) A written Energy Control Program (Lockout/Tagout) was not developed to ensure employee(s) who perform maintenance, repair, machine set-up and other associated mechanical diagnostic procedures on but not limited to CNC machines and associated equipment, and air compressor were not exposed to unexpected energizing, startup or release of stored energy from mechanical equipment.