Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 1113822.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $2,310.00
Current Penalty: $2,310.00
Issuance Date: 05/05/2016
Nr Instances: 2
Nr Exposed: 15
Abatement Date: 06/17/2016
Gravity: 1
Report ID: 0418200
Contest Date:
Final Order: 06/01/2016
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | A: Amendment | 11/08/2016 | $2,310.00 | 06/17/2016 | Serious | |
| Penalty | I: Informal Settlement | 06/01/2016 | $1,617.00 | 06/17/2016 | Serious | |
| Penalty | Z: Issued | 05/05/2016 | $2,310.00 | 05/17/2016 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): (a) Throughout the building area: On or about 12/22/2016 and at times thereto, the employer exposed employees to lacerations and fractures, in that; no guarding methods were provided while using a Walker Turner Drill Press, Model: KAB-5E. There was no guard installed or available to place around the chuck or bit to protect the operator from being caught in the rotating parts, or from flying objects. (b) Throughout the building area: On or about 12/22/2016 and at times thereto, the employer exposed employees to lacerations and amputations, in that; no guarding method were provided while using a Ryobi Drill Press, Model: DP121L. There was no guard installed or available to place around the chuck or bit to protect the operator from being caught in the rotating parts, or from flying objects.