Translate
Violation Detail
Standard Cited: 5A0001 OSH Act General Duty Paragraph
This violation item has been deleted.
Inspection Nr: 1077467.015
Citation: 01001A
Citation Type: Serious
Abatement Status:
Initial Penalty: $6,930.00
Current Penalty: $0.00
Issuance Date: 12/24/2015
Nr Instances: 1
Nr Exposed: 10
Abatement Date: 02/12/2016
Gravity: 10
Report ID: 0729300
Contest Date:
Final Order: 01/21/2016
Related Event Code (REC): C
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 01/21/2016 | $0.00 | 02/12/2016 | Serious | |
| Penalty | Z: Issued | 12/24/2015 | $6,930.00 | 02/12/2016 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
OSH ACT of 1970 Section (5)(a)(1): Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employee(s) in that employee(s) were exposed to the hazard of being struck-by: a/ The last periodic inspection of a P & H 5T Underslung Crane (DL-8 South) did not include a thorough examination of the suspension pins. A suspension pin sheared off on or about July 02, 2015 resulting in the total collapse of the hoist and its suspended load. One method of abatement to correct this apparent hazard is to inspect for loose or missing fasteners, such as bolts, nuts, pins, or rivets as required by ANSI B11.30-2010, paragraph 11-2.1.5. DISCLAIMER: a/ The employer is not limited to the abatement method(s) suggested by OSHA. b/ The employer is responsible for selecting and implementing an effective abatement method.