Translate
Violation Detail
Standard Cited: 19100147 C01 The control of hazardous energy (lockout/tagout).
Inspection Nr: 1061968.015
Citation: 01001A
Citation Type: Serious
Abatement Status: Abatement Completed
Initial Penalty: $2,800.00
Current Penalty: $1,680.00
Issuance Date: 09/01/2015
Nr Instances: 1
Nr Exposed: 22
Abatement Date: 12/31/2015
Gravity: 10
Report ID: 0521400
Contest Date:
Final Order: 09/29/2015
Related Event Code (REC):
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | I: Informal Settlement | 09/29/2015 | $1,680.00 | 12/31/2015 | Serious | |
| Penalty | Z: Issued | 09/01/2015 | $2,800.00 | 10/04/2015 | Serious |
Text For Citation: 01 Item/Group: 001A Hazard:
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: Production machines: employees were assigned to perform setup (servicing) tasks in the point of operation and associated danger zone. Hazardous energy control (lockout tagout) procedures were not developed and utilized in the workplace. Training and periodic inspections were also not conducted. Employees were exposed to hazards capable of causing hand(s) and finger(s) amputations from unexpected start-up. Abatement documentation is required for this item in accordance with the requirements of 29 CFR 1903.19(d).