Powered by GoogleTranslate

Violation Detail

Standard Cited: 19100023 C02 Ladders.

Inspection Nr: 925484.015

Citation: 01001

Citation Type: Serious

Abatement Status: Abatement Completed

Initial Penalty: $2,550.00

Current Penalty: $6,800.00

Issuance Date: 01/28/2014

Nr Instances: 1

Nr Exposed: 4

Abatement Date: 02/15/2014

Gravity: 1

Report ID: 0830500

Contest Date:

Final Order: 02/19/2014

Related Event Code (REC):

Emphasis:


Penalty and Failure to Abate Event History
Type Latest Event Event Date Penalty Abatement Due Date Citation Type Failure to Abate Inspection
Penalty I: Informal Settlement 02/19/2014 $6,800.00 02/15/2014 Serious  
Penalty Z: Issued 01/28/2014 $2,550.00 02/15/2014 Serious  

Text For Citation: 01 Item/Group: 001 Hazard:

29 CFR 1910.23(e)(1): Standard railing(s) did not consist of top rail, intermediate rail and/or posts and/or did not have a vertical height of 42 inches (106.7 cm) nominal from upper surface of top rail to floor, platform runway, or ramp level: a) Enterprise Products Operating, LP at 1250 County Road 69, Rifle, CO 81650: On and before 8/1/13, the employer did not ensure that guardrails were in place. Guardrail around the compressor was missing. The fall height into the pit was measured at approximately 4 feet 11 inches. This condition exposed employees to a fall hazard. Abatement Note: Abatement certification is required for this item (see enclosed "Certification of Corrective Action Worksheet").

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close