Translate
Violation Detail
Standard Cited: 19100212 A03 II General requirements for all machines.
Inspection Nr: 916015.015
Citation: 01001
Citation Type: Serious
Abatement Date: 08/02/2013 2
Initial Penalty: $7,000.00
Current Penalty: $4,200.00
Issuance Date: 07/16/2013
Nr Instances: 1
Nr Exposed: 1
Related Event Code (REC): R
Gravity: 10
Report ID: 0626600
Contest Date: 09/20/2013
Final Order: 12/09/2013
Emphasis:
| Type | Latest Event | Event Date | Penalty | Abatement Due Date | Citation Type | Failure to Abate Inspection |
|---|---|---|---|---|---|---|
| Penalty | R: Review Commission | 12/09/2013 | $4,200.00 | 08/02/2013 | Serious | |
| Penalty | C: Contested | 09/20/2013 | $7,000.00 | 08/02/2013 | Serious | |
| Penalty | Z: Issued | 07/16/2013 | $7,000.00 | 08/02/2013 | Serious |
Text For Citation: 01 Item/Group: 001 Hazard:
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): The employer does not guard the point of operation of all machines whose operation exposes employees to injury. This violation occurred on or about July 02, 2013, and at times prior thereto, in the Tool Room where an employee was exposed to stuck-by and caught-by hazards when operating a Clausing brand standard bed mill SN 121050 without a point of operation guard. Pursuant to 29 C.F.R. 1903.19, within ten (10) calendar days of the abatement date, the employer must submit documentation showing that it is in compliance with the standard, including describing the steps that it is taking to ensure that all the point of operations on all machines are guarded to prevent employees from having any part of their body in the danger zones during the operating cycles.